​Adhesives & Mortars

The ultimate one-step, polymer fortified, thin-set mortar for interior and exterior installation of ceramic tile, stone, quarry tile, pavers and brick.

4-XLT is a multi-use, polymer fortified adhesive mortar. 4-XLT offers tremendous utility including non-sag wall installations, medium bed build up of up to 3/4" (19 mm) and thin-set applications of floors.

315 ULTRA is a single component cementitious adhesive for dry interior floor & wall ceramic tile applications.

317 PLUS is a bagged cementitious powder. It is mixed with either water or latex admixture for installing ceramic tile and stone using the thin-set method of installation.

325 FLEXI is a single component cementitious thixotropic adhesive with improved adhesion for laying normal porcelain & stone in interior & exterior applications. Suitable for overlaying on under-floor heating.

335 MAXI S is a single component deformable cementitious thixotropic adhesive with improved adhesion for laying thick porcelain & stone in interior & exterior applications. Suitable for overlaying on under-floor heating.

335 RAPID is a single component fast setting thixotropic cementitious adhesive for improved adhesion. Walkable in a few hours

335 RAPID Stone is a single component fast setting thixotropic cementitious adhesive for improved adhesion. Walkable in a few hours

325 HIFLEX is a premium, highly flexible cementitious adhesive with extended open time, for thicknesses up to 10 mm; conforms to EN 12004 C2 TE.

320 RAPID FL is a single component cementitious fast setting pourable adhesive for improved adhesion. Suitable for laying porcelain tiles and large-format stone.

GLASS TILE ADHESIVE is a one-step, non-sag, polymer fortified adhesive mortar that is specifically formulated for use in glass tile applications.

211 Powder is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates.

LATAPOXY 300 Adhesive is a chemical resistant, epoxy adhesive that will bond to most sound, clean surfaces.

The LATAPOXY 310 Cordless Mixer is an exclusive dual component cordless mixer that quickly and easily dispenses LATAPOXY 310 Stone Adhesive onto ceramic tile, porcelain and stone veneers.

Rapid setting two component, high strength epoxy adhesive, which is formulated for the spot bonding method of tile and stone installations on vertical surfaces. 

LATAPOXY 310 Stone Adhesive is a two component, high strength epoxy adhesive, which is formulated for spot bonding fixing method of tile and stone installations on vertical surfaces.

4237 Latex Additive is a specially designed latex additive for use with 211 Powder to make high strength latex thin-set bed up to 1/8" (3 mm) and medium bed up to 5/8" (15 mm) mortars. 

73 Crete Admix is a latex admix used in place of water in portland cement and sand mixes. Tile setting mortars made with 73 Crete Admix are more flexible and are stronger than conventional portland cement mortars. This strong bond is especially important when vitreous and semi-vitreous tiles are installed.

4237 RAPID Latex Additive is a specially designed latex additive for use with 211 Crete Filler Powder to make high strength latex thin bed and medium bed adhesive up to 15 mm. For installing all types of tile, stone and agglomerates.

333 Super Flexible Additive is an extraordinarily flexible latex additive for use with thin set mortars and other cement mixes.

Designed for use with 1500 Sanded Grout and 1600 Unsanded Grout, 1776 Grout Admix Plus is used in place of water to provide a dense, colorfast grout joint that inhibits stain causing bacteria, mold and mildew growth.

282 Grout & Mortar Admix is a special latex additive for tile grouts, thin-set mortars, and cement mortar beds.

8510 Bonding Admix is an acrylic additive concentrate for mortar.

LATICRETE 3642 Latex Concentrate is a concentrated latex admix which is diluted with water on site and then mixed with LATICRETE Thick Bed Mortar or Portland cement and sand to make cement plasters, renders, coatings, mortar beds and screeds for concrete repairs.

 LATALASTIK is a two component epoxy polyurethane adhesive modified for installation of ceramic, mosaic and stone.

 LATALASTIK Fireproof is a two component fire-proof RINA approved epoxy polyurethane adhesive modified for installation of ceramic, mosaic and stone.