335 MAXI S is a pro premium, multi-purpose cementitious adhesive with low dust and variable mix ratios (thixotropic or self-wetting), for thicknesses up to 20 mm; conforms to EN 12004 C2 TE S1.

The ultimate one-step, polymer fortified, thin-set mortar (C2) for interior and exterior installation of ceramic tile, porcelain tile, thin porcelain tile, stone, quarry tile, pavers and thin brick.

345 RAPID S is an ultra pro premium, rapid-setting, multi-use adhesive mortar for thicknesses up to 30 mm; conforms to EN 12004 C2F TE S2.

345 SUPER FLEX is an ultra pro premium, super flexible, multi-use adhesive for thicknesses up to 20 mm; conforms to EN 12004 C2 TE S2.

CLEAR PA is a clear, fast-curing two-part polyaspartic aliphatic polyurea top coat for both decorative and protective applications.

An alkali-resistant, fibre glass mesh for use as reinforcement within the cementitious AQUA BARRIER waterproofing system. 

LEVEL PLUS FIBER is a premium, fibre reinforced, cement based self-levelling underlayment that can be placed from 3 to 50 mm thick; conforms to EN 13813 CT C30 F7 A1 fl.

A flexible, vapour permeable, single component cementitious waterproofing designed to protect cement-based plasters and concrete; conforms to EN 14891 CM P.

LATAFLOAT 250 MORTAR is part of the innovative LATAFLOAT floor system, a reinforced floating cement screed system that can be installed over existing floors; classified as CT-C20-F6 according to EN 13813.

A deep penetrating, solvent-free epoxy primer for use over concrete containing residual contamination from mineral oils and with slight moisture.

METALLIC PIGMENTS are powder pigments composed of specialized aluminum platelets coated with metal oxides, designed to be used exclusively with the LATICRETE® polyaspartic coating products.