HYDRO BAN is a single component, liquid-applied, waterproofing and anti-fracture membrane that does not require reinforcement fabric, suitable for indoor and outdoor use and ideal for submerged applications; conforms to EN 14891 DM OP.

Features & Benefits

For interior, exterior, and continuous submersion
Install tile, thin brick, and stone directly onto HYDRO BAN membrane
Single component and ready to use — easy and quick to apply using a brush or roller
Thin; only 0.5–0.8 mm thick when cured
Anti-fracture up to 3 mm over shrinkage and other non-structural cracks
No fabric required (for gaps or cracks with up to 3 mm horizontal movement)
Bonds directly to metal and PVC plumbing fixtures
Rapid drying — allows for flood test in approximately 2 hours after final cure (at 21°C/50% RH)
Changes in colour from a light sage to an olive green when cured — lighter colour allows for ease of inspection
Safe — no solvents and non-flammable
Equipped with Microban® antimicrobial technology to protect the treated article
Conforms to EN 14891 DM OP
Exceeds ANSI A118.10 and A118.12
IAPMO approved
“Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)

Product Information

HYDRO BAN is a thin, load bearing waterproofing and crack isolation membrane that does not require the use of fabric in field areas, coves or corners. It is a single component self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane.

HYDRO BAN bonds directly to a wide variety of substrates. It is suitable for indoor and outdoor use and is ideal for wet and submerged applications, such as showers and swimming pools.

Equipped with Microban® antimicrobial technology to protect the treated article.

Product #: L0000000000007042, L0000000000007043, L0000000000007044
Packaging Sizes:
- 5 kg pail; 80 pails per pallet
- 10 kg pail; 40 pails per pallet
- 20 kg pail; 27 pails per pallet
Part of System: LATICRETE®
Country Availability