STAIN
Available in 15 standard stain finishes.
Compare STAIN Systems
Polyaspartic coating with gloss finish over decorative concrete stain, ideal for new construction.
Surface Preparation: Mechanically profile to CSP-2
Number of Coats: 2 - 3 coats
Overall Thickness (DFT): 75 - 400 μm
Number of Coats: 2 - 3 coats
Overall Thickness (DFT): 75 - 400 μm
System Composition:
- SB VIVID DYE™
- CLEAR PA
- CLEAR PA (optional additional topcoat)
Key Features:
- High chemical, abrasion and stain resistance
- Low temperature cure (-34°C)
- Available with optional traction additives (GRIP TRACTION ADDITIVE or DIAMOND TOPP™)
- Gloss finish
Polyaspartic coating with low gloss finish over decorative concrete stain, ideal for new construction.
Surface Preparation: Mechanically profile to CSP-2
Number of Coats: 2 - 3 coats
Overall Thickness (DFT): 200 - 650 μm
Number of Coats: 2 - 3 coats
Overall Thickness (DFT): 200 - 650 μm
System Composition:
- SB VIVID DYE™
- CLEAR PA / CLEAR PA XPL LOW GLOSS
- CLEAR PA XPL LOW GLOSS (optional additional topcoat)
Key Features:
- Low VOC emissions and minimal odour
- High chemical, abrasion and stain resistance
- Available with optional traction additives (GRIP TRACTION ADDITIVE or DIAMOND TOPP™)
- Low gloss finish*
Polyaspartic coating with low VOC and gloss finish over decorative concrete stain, ideal for renovations and interior applications.
Surface Preparation: Mechanically profile to CSP-2
Number of Coats: 2 - 3 coats
Overall Thickness (DFT): 200 - 500 μm
Number of Coats: 2 - 3 coats
Overall Thickness (DFT): 200 - 500 μm
System Composition:
- SB VIVID DYE™
- CLEAR PA PURE
- CLEAR PA PURE (optional additional topcoat)
Key Features:
- Low VOC emissions and minimal odour
- High chemical, abrasion and stain resistance
- Low temperature cure (-4°C)
- Available with optional traction additives (GRIP TRACTION ADDITIVE or DIAMOND TOPP™)
- Gloss finish
Polyaspartic coating with low VOC and low gloss finish over decorative concrete stain, ideal for renovations and interior applications.
Surface Preparation: Mechanically profile to CSP-2
Number of Coats: 2 - 3 coats
Overall Thickness (DFT): 300 - 750 μm
Number of Coats: 2 - 3 coats
Overall Thickness (DFT): 300 - 750 μm
System Composition:
- SB VIVID DYE™
- CLEAR PA PURE / CLEAR PA XPL LOW GLOSS
- CLEAR PA XPL LOW GLOSS (optional additional topcoat)
Key Features:
- Low VOC emissions and minimal odour
- High chemical, abrasion and stain resistance
- Available with optional traction additives (GRIP TRACTION ADDITIVE or DIAMOND TOPP™)
- Low gloss finish*
Polyaspartic coating with low VOC and gloss finish over decorative concrete stain, formulated for high antibacterial resistance in areas where sanitary coatings are required.
Surface Preparation: Mechanically profile to CSP-2
Number of Coats: 2 - 3 coats
Overall Thickness (DFT): 300 - 750 μm
Number of Coats: 2 - 3 coats
Overall Thickness (DFT): 300 - 750 μm
System Composition:
- SB VIVID DYE™
- CLEAR PA PURE CLINICAL PLUS
- CLEAR PA PURE CLINICAL PLUS (optional additional topcoat)
Key Features:
- Low VOC emissions and minimal odour
- CLINICAL PLUS additive is blended and integral to the coating itself
- High chemical, abrasion and stain resistance
- Low temperature cure (-4°C)
- Available with optional traction additives (GRIP TRACTION ADDITIVE or DIAMOND TOPP™)
- Gloss finish
*For the Low Gloss finish, use CLEAR PA XPL LOW GLOSS as final topcoat.
NOTE: For protection against moisture vapour or when the concrete measures 3% RH or greater, as measured using an electric hygrometer, use LATICRETE® MOISTURE VAPOR BARRIER as your base coat before applying the resin.
DFT = Dry Film Thickness
CSP = Concrete Surface Profile (learn more here)