GUARD

SPARTACOTE Guard
SPARTACOTE GUARDSolid Colour GUARD Finish
The LATICRETE GUARD system is a solid colour, thin-build coating designed to provide a durable, rapid return-to-service floor. 

Available in 14 standard colours including safety colours. Custom colours available upon request.

Compare GUARD Systems

100% polyaspartic system with gloss finish, ideal for new construction.
Surface Preparation: Mechanically profile to CSP-2
Number of Coats: 2 - 3 coats
Overall Thickness (DFT): 150 - 600 μm
System Composition:
Key Features:
100% polyaspartic system with low gloss finish, ideal for new construction.
Surface Preparation: Mechanically profile to CSP-2
Number of Coats: 2 - 3 coats
Overall Thickness (DFT): 200 - 650 μm
System Composition:
Key Features:
  • Low VOC emissions and minimal odour
  • High chemical, abrasion and stain resistance
  • Available with optional traction additives (GRIP TRACTION ADDITIVE or DIAMOND TOPP™)
  • Low gloss finish*
100% polyaspartic system with low VOC and gloss finish, ideal for renovations and interior applications.
Surface Preparation: Mechanically profile to CSP-2
Number of Coats: 2 - 3 coats
Overall Thickness (DFT): 400 - 750 μm
System Composition:
Key Features:
  • Low VOC emissions and minimal odour
  • High chemical, abrasion and stain resistance
  • Low temperature cure (-4°C)
  • Available with optional traction additives (GRIP TRACTION ADDITIVE or DIAMOND TOPP™)
  • Gloss finish
100% polyaspartic system with low VOC and low gloss finish, ideal for renovations and interior applications.
Surface Preparation: Mechanically profile to CSP-2
Number of Coats: 2 - 3 coats
Overall Thickness (DFT): 300 - 750 μm
System Composition:
Key Features:
  • Low VOC emissions and minimal odour
  • High chemical, abrasion and stain resistance
  • Available with optional traction additives (GRIP TRACTION ADDITIVE or DIAMOND TOPP™)
  • Low gloss finish*
100% polyaspartic system with gloss finish, formulated for high antibacterial resistance in areas where sanitary coatings are required.
Surface Preparation: Mechanically profile to CSP-2
Number of Coats: 2 - 3 coats
Overall Thickness (DFT): 300 - 750 μm
Key Features:
  • Low VOC emissions and minimal odour
  • CLINICAL PLUS additive is blended and integral to the coating itself
  • High chemical, abrasion and stain resistance
  • Low temperature cure (-4°C)
  • Available with optional traction additives (GRIP TRACTION ADDITIVE or DIAMOND TOPP™)
  • Gloss finish

*For the Low Gloss finish, use CLEAR PA XPL LOW GLOSS as final topcoat.

NOTE: For protection against moisture vapour or when the concrete measures 3% RH or greater, as measured using an electric hygrometer, use LATICRETE® MOISTURE VAPOR BARRIER as your base coat before applying the resin.

DFT = Dry Film Thickness
CSP = Concrete Surface Profile (learn more here)