FLAKE
FLAKE Finish
Compare FLAKE Systems
100% polyaspartic system with gloss finish, ideal for new construction.
Surface Preparation: Mechanically profile to CSP-2
Number of Coats: 2 - 3 coats
Overall Thickness (DFT): 400 - 700 μm
Number of Coats: 2 - 3 coats
Overall Thickness (DFT): 400 - 700 μm
System Composition:
Key Features:
- High chemical, abrasion and stain resistance
- Low temperature cure (-34°C)
- Available with optional traction additives (GRIP TRACTION ADDITIVE or DIAMOND TOPP™)
- Gloss finish
100% polyaspartic system with low gloss finish, ideal for new construction.
Surface Preparation: Mechanically profile to CSP-2
Number of Coats: 2 - 3 coats
Overall Thickness (DFT): 500 - 1000 μm
Number of Coats: 2 - 3 coats
Overall Thickness (DFT): 500 - 1000 μm
System Composition:
- Primer (optional)
- GUARD PA with broadcast FLAKE
- CLEAR PA / CLEAR PA XPL LOW GLOSS
- CLEAR PA XPL LOW GLOSS (optional additional topcoat)
Key Features:
- Low VOC emissions and minimal odour
- High chemical, abrasion and stain resistance
- Available with optional traction additives (GRIP TRACTION ADDITIVE or DIAMOND TOPP™)
- Low gloss finish
100% polyaspartic system with low VOC and gloss finish, ideal for renovations and interior applications.
Surface Preparation: Mechanically profile to CSP-2
Number of Coats: 2 - 3 coats
Overall Thickness (DFT): 830 - 1400 μm
Number of Coats: 2 - 3 coats
Overall Thickness (DFT): 830 - 1400 μm
System Composition:
- Primer (optional)
- GUARD PA PURE with broadcast FLAKE
- CLEAR PA PURE
- CLEAR PA PURE (optional additional topcoat)
Key Features:
- Low VOC emissions and minimal odour
- High chemical, abrasion and stain resistance
- Low temperature cure (-4°C)
- Available with optional traction additives (GRIP TRACTION ADDITIVE or DIAMOND TOPP™)
- Gloss finish
100% polyaspartic system with low VOC and low gloss finish, ideal for renovations and interior applications.
Surface Preparation: Mechanically profile to CSP-2
Number of Coats: 2 - 3 coats
Overall Thickness (DFT): 950 - 1600 μm
Number of Coats: 2 - 3 coats
Overall Thickness (DFT): 950 - 1600 μm
System Composition:
- Primer (optional)
- GUARD PA PURE with broadcast FLAKE
- CLEAR PA PURE / CLEAR PA XPL LOW GLOSS
- CLEAR PA XPL LOW GLOSS (optional additional topcoat)
Key Features:
- Low VOC emissions and minimal odour
- High chemical, abrasion and stain resistance
- Available with optional traction additives (GRIP TRACTION ADDITIVE or DIAMOND TOPP™)
- Low gloss finish*
100% polyaspartic system with gloss finish, formulated for high antibacterial resistance in areas where sanitary coatings are required.
Surface Preparation: Mechanically profile to CSP-2
Number of Coats: 2 - 3 coats
Overall Thickness (DFT): 830 - 1400 μm
Number of Coats: 2 - 3 coats
Overall Thickness (DFT): 830 - 1400 μm
System Composition:
- Primer (optional)
- GUARD PA PURE CLINICAL PLUS with broadcast FLAKE
- CLEAR PA PURE CLINICAL PLUS
- CLEAR PA PURE CLINICAL PLUS (optional additional topcoat)
Key Features:
- Low VOC emissions and minimal odour
- CLINICAL PLUS additive is blended and integral to the coating itself
- High chemical, abrasion and stain resistance
- Low temperature cure (-4°C)
- Available with optional traction additives (GRIP TRACTION ADDITIVE or DIAMOND TOPP™)
- Gloss finish
*For the Low Gloss finish, use CLEAR PA XPL LOW GLOSS as final topcoat.
NOTE: For protection against moisture vapour or when the concrete measures 3% RH or greater, as measured using an electric hygrometer, use LATICRETE® MOISTURE VAPOR BARRIER as your base coat before applying the resin.
DFT = Dry Film Thickness
CSP = Concrete Surface Profile (learn more here)
